Installation – Panasonic AW-PH650 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation
<When the AK-HC1500 camera is used>
® Attach the positioning screw© (supplied) to the camera
mount ©.
@ Attach the camera mount © using the 2 screws 0, flat
washers o and spring washers © (supplied).
(The camera mount points toward the front or back in
the opposite way from a convertible camera. For pointing
upward or downward, make sure that the two sides of the
camera mount are higher — which is the opposite from
when the AK-HC910 is used — than the central area that
is attached.)
@ Attach the lens to the camera.
Remove the lens hood and zoom lever.
The camera mount in the opposite direction
from when the AK-HC910 is used as the
camera.
To ensure that none of the screws are loose,
use a tool to tighten them up securely.
19(E)