Tone, recall and redial/pause buttons, Tone, Redial/pause – Panasonic KX-F2781NZ User Manual
Page 38: Recall, Note, Tone button, Recall button, Entering pauses, Redialing the last number dialed
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TONE, RECALL and REDIAL/PAUSE buttons
TONE button---------------------------
The TONE (*) button is used for rotary pulse dial
services and allows you to temporarily change from
pulse to tone mode during a dialing operation.
When you hang up, the unit will automatically return to
pulse mode.
RECALL button_____________
[TONE]
CD CD CD
CD CD CD
CD CD CD
^CDCD
The RECALL button allows you to use special features
of the host exchange {if connected) or local telephone
company services such as call waiting. For further
details, contact the supplier of your local telephone
company.
REDIAL/PAUSE
[RECALL]
Note:
•TONE, RECALL and PAUSE can be stored
into a phone number for automatic dialing.
Entering pauses
If the REDIAL7PAUSE button is pressed during dialing, a pause will be inserted.
Example-1: When your unit is connected to a host exchange, insert a pause to get an outside iine.
Example-2: If transmission errors occur when making an overseas transmission, add two pauses at the end
of the phone number.
Redialing the last number dialed
If the REDIAL7PAUSE button is pressed immediately after a dial tone is obtained, the last number dialed will
be redialed.
1. Lift the handset or press [SP-PHONE).
2. Press [REDIAL/PAUSE].
• If the line is busy when using the speakerphone, the unit will automatically redial the number up to
2 times.
38