Panasonic KX-F2781NZ - Manual (Page 59)

Re-recording a greeting message
You can change the contents of the greeting messages for the ANS/FAX mode and mailbox memories.
To re-record a mailbox greeting message, you must first select a mailbox.
1. Press {?] to start recording during the remote operation.
•A long beep will sound.
2. Speak up to 16 seconds.
• If you pause for over 2 seconds, 6 beeps will sound and the recording will stop. Repeat from
step 1 within 10 seconds.
3. When finished, press 0.
•The new greeting message will be played.
Turning message transfer/pager call on or off
You can remotely turn on or off message transfer/pager call for incoming messages. You must program a
transfer phone number or a pager number in advance (see page 54).
Press 0 [D to turn ON message transfer/pager call
during the remote operation.
Press ® U] to turn OFF message transfer/pager
call.
-If a transfer phone number or a pager number is
not programmed, the voice guide will be played.
You cannot turn this feature on.
Skipping the greeting message
You can skip the greeting message.
Press during the greeting message playback.
—The unit will skip the rest of the greeting message.
Example of the voice guide:
Message transfer is set.
Transfer phone number is 123456789.
or
Pager cali is set
Pager number is 098765432.
Message transfer is off.
or
Pager call is off.
Transfer phone number is not set
or
Pager number is not set
59