Clarion MAX675VDII - Manual (Page 18)

Basic Operations
22
MAX675VDII
English
Owner
’s ma
nua
l
Opening/closing the operation panel
1. Press the [
7] (OPEN/CLOSE) button.
The operation panel will be opened or closed.
Note:
• The operation panel will close automatically when
leaving it open for a while.
• When the operation panel is open, the touch panel
cannot be operated.
Adjusting the angle of the operation
panel
The angle of the operation panel can be adjusted
in the range of 0
q to 30q.
1. Keep pressing the [
7] (OPEN/CLOSE) button
more than 2 seconds.
Beeps will sound twice and the operation
panel will start moving.
2. When the operation panel is moved to your
desired angle, release the button.
The operation panel will stop.
* Once you adjust the angle of the operation
panel, the operation panel will return to the
adjusted angle even after it is open/closed.
Returning the operation panel to the
original angle
1. Keep pressing the [
7] (OPEN/CLOSE)
button.
It will move, and stop at 30
q.
2. Keep pressing the [
7] (OPEN/CLOSE) button
again.
It will move, and stop at 0
q.
Adjusting the AUDIO
Note:
• When the optional 5.1 ch Surround Decoder
(DVH940N) is used, the following tone
adjustments cannot be made. To adjust the tone,
refer to the section “5.1 ch Surround Decoder
Operations” (page 59).
1. Press the [ADJ] button, then touch the
[AUDIO] key.
2. Touch the item key to adjust.
3. Perform the adjustment.
See the following sections for detail.
4. Touch the [Back] key to return to the previous
screen.
* In the following sections, only the details
regarding adjustments are described,
procedures to select items are skipped.
Adjusting the balance/fader
2-1. Touch the [
]] key of the BAL/FAD item.
3-1. Touch the [
{] or [}] key to adjust to the
fader level.
• The factory default setting is “0”.
(Adjustment range: front 12 to rear 12)
[
{]:
Emphasizes the sound from the front
speakers.
[
}]:
Emphasizes the sound from the rear
speakers.
3-2. Touch the [
[] or []] key to adjust to the
balance level.
• The factory default setting is “0”.
(Adjustment range: left 13 to right 13)
[
[]:
Emphasizes the sound from the left
speakers.
[
]]:
Emphasizes the sound from the right
speakers.