Clarion MAX675VDII - Manual (Page 53)

57
MAX675VDII
English
Owner
’s ma
nua
l
NAVI Operations
NAVI functions
Note:
• Hereafter in this section, the Navigation system will
be called as “NAVI”.
• When the Clarion NAVI NAX970HD is connected,
the following functions are available:
• Showing the NAVI display
• Operation by using the panel side buttons
• NAVI guidance voice interruption
• When a voice interrupt of the NAVI arises during 2-
ZONE ON, the sound of the MAIN zone is muted,
and the sound of the SUB zone is output normally.
When it arises during 2-ZONE OFF, the audio
signals to the 4ch speakers are attenuated, and
the voice from the navigation system is output from
the front two speakers.
• Since the Clarion NAVI (NAX970HD) is
automatically recognized, you can omit the below-
mentioned CONNECT setting.
Setting NAVI as external input
equipment
Perform this setting after connecting NAVI.
• The factory default setting is “NONE”.
1. Press the [ADJ] button, and touch the
[GENERAL] key.
2. Touch the [
C] key to display the next menu
screen, and touch the [NAVI], [OTHER] or
[NONE] key of the CONNECT item to set the
function.
NAVI:
Select when a NAVI is connected.
Control of it can be made only from the remote
control unit.
OTHER:
Select for external devices other than a NAVI.
NONE:
Select when no external device is connected.
NAVI operation
Changes between the NAVI display and the
Audio/Visual (hereinafter, referred as “AV”)
display.
Note:
• The below-mentioned [NAVI] and [AV] keys are
available only when the Clarion NAVI
(NAX970HD) is connected.
When the other NAVI is connected, use the [MAP]
button to switch the screen mode.
●AV screen
When the image interruption from the NAVI
arises, the screen will be changed from the AV
screen to the NAVI screen. When the interruption
is finished, the screen will return to the previous
AV screen.
●NAVI screen
Audio operations made in the NAVI mode will be
indicated for about 2 seconds at the bottom of the
NAVI screen.
●Operations using the buttons
[MAP] button
• The MAP screen of the NAVI mode is
displayed.
• When in the AV mode, it is changed to the
NAVI mode.
[MENU] button
• When in the NAVI mode, the MENU screen of
the NAVI mode is displayed.
[MAP] key
[AV] key