Clarion MAX675VDII - Manual (Page 22)

Basic Operations
26
MAX675VDII
English
Owner
’s ma
nua
l
Performing the system check
Changing the output speaker for the
cellular phone
When you connect your cellular phone to this unit
using a separately sold adaptor, you can listen to
your telephone calls on your car speakers.
• The factory default setting is “RIGHT”.
• To output the telephone calls, set the following
TEL SWITCH item to “ON”.
Note:
• During cellular phone interrupts, setting this
function is disabled.
Cellular phone interrupt setting
• The factory default setting is “OFF”.
Note:
• This function is not compatible with all cellular
telephones. Contact your local authorized Clarion
dealer for information on proper installation and
compatibility.
• When you set this function to “OFF”, disconnect
the cellular phone from the cable or turn off the
power of the cellular phone.
Setting the voice input line for the
cellular phone
When you connect your cellular phone to this
unit, select the connection method of the adaptor
box.
• The factory default setting is “CeNET”.
Note:
• When setting to “AUX”, the VISUAL mode is
altered to the ACCESSORY mode.
Switching CONNECT (connect)
Make the following settings when an external
device is connected to the Visual terminal.
3-1. Touch the [
]] key of the SYSTEM CHECK
item.
3-2. Touch [Check] key at the top right of the
screen to perform the system check
manually.
The system will be restarted after
performing the system check.
3-1. Touch the [LEFT] or [RIGHT] key of the TEL
SP item to set to “LEFT” or “RIGHT”.
LEFT:
Telephone calls are heard from the front left
speaker connected to this unit.
RIGHT:
Telephone calls are heard from the front
right speaker connected to this unit.
3-1. Touch the [ON], [OFF] or [MUTE] key of the
TEL SWITCH item to set to “ON”, “OFF” or
“MUTE”.
ON:
You can listen to your telephone calls from
the speakers connected to this unit.
* When listening to your calls on your car
speakers, you can adjust the volume using
the [+]/[–] buttons.
OFF:
This unit continues normal operation even
when you use the cellular phone.
MUTE:
The sound from this unit is muted during
telephone calls.
3-1. Touch the [
C] key to display the next menu
screen.
3-2. Touch the [CeNET] or [AUX] key of the TEL
SELECT item to set to “CeNET” or “AUX”.
CeNET:
Selects when the adaptor box is connected
via the CeNET.
AUX:
Selects when the adaptor box is connected
to Audio (left/right) of the Visual input
terminal.
NAVI:
When a navigation system is connected.
* When the navigation system is connected, use the
monitor lock function. Locking the monitor locks
the screen size in F.WIDE mode (full wide) and the
VTR system to NTSC.
OTHER:
For external devices other than a navigation
system.
NONE:
When no external device is connected.
• The factory default setting is “NONE”.
3-1. Touch the [
C] key to display the next menu
screen.
3-2. Touch the [NAVI], [OTHER] or [NONE] key
of the CONNECT item to set the function to
“NAVI”, “OTHER” or “NONE”.