Panasonic CQ-DF802U - Manual (Page 29)

One-Touch Selection of a Station
Up to 6 stations each can be saved in the FM1, FM2, FM3 and AM preset station memories.
Manual Preset
Memory
Manually save a station in
the preset memory.
(T) Select a band and frequency (steps 0> © and O on the previous
page).
@ Press and hold the Spectrum Analyzer display |TUNE| for more than
2 seconds until the preset number blinks.
@ Press or /[^] or [ v] to select a preset number (1-6).
(4) Press and hold |P.SET| (preset) for more than 2 seconds to memo­
rize. Preset number
• The display blinks once, and a re­
ceiving station is saved in the
memory.
Note: Spectrum Analyzer display |P.SET
• Frequency setting can be performed even after selecting a preset num­
ber.
Entering numbers directly onthe remote control unit
(J) Select a band and frequency (step 0> © and 0 on the previous
page).
(2) Press and hold [1J to [6] for more than 2 seconds to memorize.
Auto Preset
Memory (АРМ)
Automatically save rela­
tively strong stations in
the preset memory.
Г
r I t(L
I mute I
d r - e
= ^ Q =
.-rP.SET
(J) Select a band (steps О and @ on the Scanning:
previous page). ^ '
@ Press and hold [BANDJ (АРМ) for
more than 2 seconds.
• The 6 strongest available stations will be automatically saved in the
memory under preset number 1 to 6.
• Once set, the preset stations are sequentially scanned for 5 seconds
each. (Scanning)
• Press o r /[/\] or [ V ] for the broadcast you want to listen
to.
(Press [1] to [6] on the remote control unit.)
-
Note:
• Existing saved stations are oi
^^
i/erwritten with new stations after following this procedure.
-------
------------------------------------------------------------------------------------- ,
Preset Station
Calling
(J) Select a band (steps O and O on the previous page).
@ Press the Spectrum Analyzer display |TUNE| to show |P,SEf| (preset).
@ Press or A] or [V] to select the preset number for tuning
in the preset station.
(Press [11 to [61 on the remote control unit.)
CQ-DF802U
29