Set up features, Auto power on, Aspect ratio – Panasonic CT-3696VY-1 User Manual
Page 48: Color matrix, Geomagnetic corr (correction), Aspect ratio color matrix, W to
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Set Up Features
Helpful Hints:
Setting DTV mode Set Up Features will aiso
change TV Mode and PC mode Set Up Features.
Auto Power On
This feature automaticaliy turns the monitor ON when
AC power is applied.
1. Press ^3) ■
2. Press A or ^ and or ^ to select the Set
Up Icon.
3. Press iUEHsU] to display the Set Up menu.
AUTO POWER ON
ÌC’O’iiOÌR
:G.E.O.M'A:
g
:
n
EiTilCIGARR
'KGS
4.
5.
6
.
Press
A
or
W to
highlight AUTO POWER ON.
Press
or ^
to select SET.
Press UssUl twice to exit menus.
Aspect Ratio
This feature is used to change the aspect ratio of the
screen when connected to a DTV unit.
1. Press ^3 ■
2. Press
A
or
W
and or to highlight the
Set Up Icon.
3. Press ^3) to display the Set Up menu.
MW
0 EOX№.N EiTilCiGAR R
HilHaJ
4. Press or ^ to select AUTO, 16:9 (wide
picture), or 4:3 (normal picture).
5. Press twice to exit menus.
Color Matrix
This feature is used to change the picture Color Matrix
to Standard or High.
1. Press ^3 •
2. Press
A
or ^ and or ^ to highlight the
Set Up Icon.
3. Press
to display the Set Up menu.
4. Press
^
or to select AUTO, HD (High
Definition), or SD (Standard Definition).
5. Press twice to exit menus.
Geomagnetic Corr (Correction)
This monitor incorporates a special adjustment feature
for the convenience of the customer. This adjustment is
preset at the factory. However, adjustment may be
required when the monitor is moved (due to the
influence of earth’s magnetic field) which may cause
the picture to tilt slightly. If necessary, follow these
procedures to adjust the tilt.
1 . Press ^3-
2. Press
A
or and or to highlight the
Set Up icon.
3. Press (^3 to display the Set Up menu.
4.
5.
highlight
GEOMAGNETIC CORR.
Press or to display the Geomagnetic
Correction adjustment menu.
tilt adjustment bar
6. Press or to adjust the picture tilt until left
and right side of tilt adjustment bar is parallel to the
bottom of picture frame (if necessary).
NOTE: Discoloration may be visible in picture
corners if tilt bar is not parallel to the
bottom of picture frame.
7.
Press it^il twice to exit menus.
- 4 8 -