Adjustment, Alarm timing adjustment – Panasonic WJ-SQ308 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
ADJUSTMENT
Alarm Timing Adjustment
The alarm timing interval is preset to approx, 1 minute. And by turning the VR2, the alarm timing interval can be set from 1 to 5 min
utes.
1. Connect the Alarm Input Connector (7) with the Ground Terminal (GND). The alarm operation can be obtained and the Alarm
Indicator (3) blinks,
2. Adjust the alarm timing interval by turning the VR2 while observing the Alarm Indicator (3) status.
Note : In case of using this switcher with the Time Lapse VTR, be sure to adjust the alarm timing interval of this switcher so that
it is shorter than the Time Lapse VTR.
-
10
-
Advertising