Panasonic WJ-SQ308 - Manual (Page 8)

Connect the sensor switches and the Time Lapse VTR with the proper cables. The sensor should have an open-collector out­
put or non-voltage contact.
Time Lapse VTR
ALARM I
\ s c m
REStI
IN RECOVER
OUT
GNO OUT QND
Alarnn Input Connector (provided)
Pin No. Signals Wire Color
1 chi Input Brown
2 ch2 Input Red
3 ch3 Input Orange
4 ch4 Input Yellow
5 ch5 Input Green
6 ch6 Input Blue
7 ch7 Input Purple
8 ch8 Input Grey
9 chi earth Black
10 ch2 earth Black
11 ch3 earth Black
12 ch4 earth Black
13 ch5 earth Black
14 ch6 earth Black
15 ch7 earth Black
16 ch8 earth Black
Note: Be sure to insulate the wire(s) which is (are) not con­
nected.
Alarm Input Connector
(provided)
The capacity of the Alarm Output Connector is 30V
DC maximum, 100mA or less
ALARM OUT
-
6
-