Basic-qperation, Function, Tapping/ciicking – Panasonic TOUGHBOOK CF-48 User Manual
Page 17: Double-tapping, Dragging, Touch pad operation, Phandling-thetouch-pad-j, Touch pad, Basic operation)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Touch Pad
(Basic Operation)
Work Surface
Use the touch pad to move the cursor on the display and perform normal computer operations.
For instructions on how to operate, refer to
“Touch Pad (Advanced)”.
^NOTE>
The touch pad has been designed to work only when a finger is used. Therefore, do not use
any implement on the touch pad.
■Basic-Qperation-|
Function
Moving the Cursor
Tapping/Ciicking
Double-Tapping/
Double-Clicking
Dragging
Touch Pad Operation
Move the tip of your finger
lightly over the surface.
or
or
Two quick taps, but on the sec- While holding down the but-
ond tap leaving your finger ton, moving your finger on
down (applying pressure) and the work surface,
moving it on the work surface.
pHandling-theTouch-Pad-j
• Do not place any object on the work surface or press down forcefully with sharp-pointed
objects (e.g., nails), hard objects that can leave marks (e.g., pencils and ball point pens).
• Do not allow things that could dirty the touch pad, such as oil. The cursor may not work
properly in such cases.
• When the touch pad becomes dirty:
Wipe to remove dirty áreas by using a dry soft cloth such as gauze or a soft cloth first
applied with detergent diluted with water and then thoroughly wrung.
Do not use benzene, thinner, or disinfectant-type alcohol.
17