Panasonic SCAK75 - Manual (Page 19)

Listening to CDs
!■ I
i
о
о О
О
Iri
I Ч
To cancel program play mode
Press PROGRAM in the stop mode.
Programmed contents will be saved in memory.
Pressing ■ will cancel program play, but it will also erase the entire
program.
To select a two-digit track
Press >10 and then the two numbers you want.
For example
Track no. 20: >10-^2-^0
Track no. 35: >10^3->5
When “CD FULL” appears H
The number of programmed tracks is limited to 24. No further tracks
can be programmed.
You can do the following while stopped during program mode
m
•Check program contents.
Press or
Everytime you press one of the buttons, the track and program No.
are shown on the display.
•Add to the program.
Repeat steps 3 through 5.
• Cancel entries. 0
From the last
programmed track Press CANCEL.
A specified track
only Select the track with or
, and press CANCEL within
3 seconds.
All tracks Press ■.
Memory retention
Your program is retained in memory for about 2 weeks while the
system is unplugged.
C
.0
<«
s
&
8
To replay your program
If you turned OFF your program with PROGRAM, you can play it
again.
1. Press PROGRAM.
2. Press
► / I I / a .
If you program a track not on your CDs
The track is initially programmed, but during program play, the
changer will skip that track and will continue playing from the next
programmed item.