Verifying your ogm, Suggested message, Ogm backup – Panasonic KX-F195 User Manual
Page 23: Re-recording ogm, Re-recording ogm -16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Verifying your OGM
Press the OGM PLAY button.
The unit replays your OGM. If you want to change
your OGM, perform the operation on page 1-15
again. The previous message will be automatically
erased and a new message will be recorded.
Suggested message
Record your OGM referring to the examples below.
'This is (your name, business and/or telephone number). We are out right now. To send a fax, start
transmission. To leave a message, speak after the long beep. Thank you. ”
“This is (your name, business and/or telephone number). We are out right now. To send a fax, start
transmission. To leave a message, speak for up to 1 minute after the long beep. Thank you. ”
You can choose from two types of recording time of incoming messages. When the unit is in the
“VOX" position, the recording time is unlimited, and when in the “1 MIN” position, the recording time
is limited to 1 minute. The two examples above correspond to these two conditions.
The unit is preprogrammed to the “VOX” position. To change the recording time, see page 5*3.
OGM backup
After your OGM is recorded on the microchip memory, it is recorded onto the tape from the
microchip as a backup.
If a power failure takes place or the POWER switch is turned off, the OGM recorded on the
microchip will be erased. However, after the power is restored, the unit will automatically re-recorded
the OGM onto the microchip using the OGM recorded on the tape. You need not re-record your
OGM.
Re-recording OGM
When you replace the cassette tape with a new one or you use the opposite side (side-2), you have
to record an OGM again. See page 1-15.
1-16