Auto receive timer – Panasonic KX-F195 User Manual
Page 58
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Auto receive timer
This feature allows you to set the unit in the auto receiving mode (TAD/FAX or FAX) for the desired
time automatically. For example, you may wish to use the unit in the TEL mode during the work days
and switch to the TAD/FAX or FAX mode during the evenings.
The TAD/FAX or FAX mode is automatically turned ON or OFF at the preprogrammed time.
To activate this function, use AUTO RECEIVE TIMER in the programming functions.
1
2
3
4
5
Press the PROGRAM button.
The PROGRAM indicator lights and the display
shows “P-_”.
Press then press “34” for AUTO RECEIVE
TIMER setting.
The display shows “P-F34 2”.
Setting selections are:
1: Turning the auto receive timer ON.
2: Turning the auto receive timer OFF.
Press “1 ” to turn the auto receive timer on, then
press the SET button.
The display shows P-F34 12-00".
Enter the ON time at 4-digit.
For example, if ON time is 5:00PM, press
“0 5 0 0", then press to select PM.
“PM" or “AM" is shown alternately by each
pressing of “-x-".
To correct an error, press the STOP/CLEAR button
then correct input.
Press the SET button.
The display shows “P-F34 1".
Setting selections are;
1: TAD/FAX mode
2: FAX mode
3-1