Panasonic KX-F195 - Manual (Page 9)

Installation connections
Connect the AC power cord, the telephone line cord and the handset cord as shown below. Then
connect your unit to the AC outlet and the telephone line.
Handset
AC Outlet
(120 V, 60 Hz)
Connect to
“TO TEL LINE”
Modular Jack
for single line (RJ11C)
^ itl ^ 'ттГГ»1________ n ^
0
/ AC Surge \
€
\ Protector /
C
C.O. Surge \
Protector /
Connect to
“TO EXTERNAL TEL’
Reserve Telephone
The unit including the telephone handset will not function during a power failure or power off.
However, if you have a reserve telephone connected to the port of the “TO EXTERNAL TEL”, you
will still be able to nnake calls during a power failure or power off.
Avoid using the same AC outlet for the unit and other equipments. We recommend you to use an
exclusive AC outlet to avoid interference from other equipment.
If you connect another extension to the same line that your unit is connected to, do not use another
telephone during fax transmission and reception. It will affect image quality.
This unit is equipped with a 3-wire grounded type plug for safety. This plug will only fit into a
grounding-type power outlet. If you are unable to insert the plug into your outlet, contact your
electrician to replace your outlet.
In areas of frequent electrical storms and/or power failure, we recommend, for additional equipment
protection, surge protectors such as TELESPIKE BLOK MODEL TSB (TRIPPE MFG. CO.), SPIKE
BLOK MODEL SK6-0 (TRIPPE MFG. CO.). SUPER MAX (PANAMAX) or MP1 (ITW LINX).
1-2