Caldera Paradise Series - Manual (Page 8)

Page 6
9. INSTALL THE SPA COVER
• Place the cover squarely on the spa.
• Position the tie-down locks included with your cover
on the side of the spa so that they are easily reached
by the cover tie-down straps. Allow for about 1/2” to
3/4” slack in the straps to make it easy to insert straps
into locks and to compensate for vinyl shrinkage in
cold weather.
• Attach the locks with the screws provided and insert
the cover tie-down straps into the locks.
Keeping the cover in place any time the spa is not in
use will reduce the amount of time the heater oper-
ates, thereby minimizing operating costs.
DANGER. RISK OF INJURY.
• Never leave a spa uncovered or unattended.
• Never leave a spa cover unlocked.
• Do not stand, sit or lie on the cover.
COVER INSTALLATION
TIE-DOWN STRAP
LOCK
COVER
KEY
SCREW (2)
1. Power diverter
2. Air control
3. Air jets
4. Filter compartment
5. Spa-side control panel
6. Temperature sensor
7. Spa light
8. Euphoria jet
9. Drain/suction fitting
10. Ozone
TOP VIEW - FEATURES
GENEVA MODEL SHOWN.
FEATURES AND LOCATIONS MAY VARY IN OTHER MODELS.
START-UP INSTRUCTIONS
1
1
2
2
2 2
3
4
5 6 2
3
7
8
9
10