Caldera Paradise Series - Manual (Page 9)

CUSTOMIZING YOUR MASSAGE
Page 7
Your Caldera spa offers numerous ways for you to cus-
tomize your massage experience. Experimentation is the
best way to find what feels best to you. Try sitting in dif-
ferent seats, adjusting the Power Diverters, air controls
and jet nozzles and turning each pump on or off.
POWER DIVERTERS
One Power Diverter is standard on your spa, another is option-
al equipment. These allow you to direct the flow of water from
the pumps to various combinations of jets.
The functions of these Power Diverters can best be learned by
experimentation as follows:
1. Set all air controls to the “MAX” position.
2. Turn on the high speed of both pumps.
3. Note the labels on the Power Diverters and turn the
handles and see which groups of jets are affected.
(Note that you can adjust the Power Diverters to any
position between the two possible extremes to achieve
the jet pressure that feels best to you.)
AIR CONTROLS
Each jet system has its own air control. These allow you
to change the power of the jets by regulating the amount
of air that is mixed with the water coming out of the jets.
HYDRO JETS
Magna Jets - These jets allow you to re-direct the jet stream by
changing the position of the nozzle.
MagnaSsage Jets - These jets provide a rotating mas-
sage pattern.
The nozzles in the Magna jets and the MagnaSsage jets
are interchangeable. To remove a MagnaSsage rotating
nozzle, simply grasp it and pull straight out. To install,
align and push straight in. the nozzle will snap into place.
To remove or install a standard Magna jet nozzle, rotate
the tabs on either side of the nozzle.
Additional
MagnaSsage rotating nozzles and dual-port nozzles are
available from your Caldera dealer.
Both the Magna and MagnaSsage jets allow you to regu-
late the force of the massage.
Rotate the fascia ring
clockwise to reduce the force or counter-clockwise to
increase the force. Notice that turing off the flow to some
jets increases the flow to the other jets. To avoid damage
to your spa’s plumbing and components, do not turn off
more than half of these jets at the same time.
Euro and Euro-Pulse Jets - The small euro jets deliver a direct,
precision massage. Many of these jets feature a special insert
that creates a soft, pulsating, rotary massage. The roto jet cap
assemblies may be removed if you want a more powerful,
direct massage in a particular location. To do this, gently pry
around the outside edge of the cap assembly with a table knife,
screwdriver or similar tool. If you desire, you may install a roto
jet cap removed from one jet onto a standard euro jet simply
by snapping the assembly into place. You may purchase addi-
tional roto jet assemblies from your Caldera dealer.
AIR JETS
The Air jet system consists of a 1 HP Air pump and 10 Air
jets. At the beginning of each skim/filter cycle, the Air jets
will operate for 30 seconds to clean out the air channel.
TIP: Turn both pumps on high speed and position the
Power Diverters to “Combo”. Then experiment with
each of the air controls to see their effect.
IMPORTANT: Your spa is not designed to provide full
power to all jets when the Power Diverters are in the
“Combo” position. However, with the Power Diverter in
this position, you may increase the power to selected
jets by rotating the face of the Magna and
MagnaSsage jets to close the ones that are not in use.
FULL FLOW
FULL FLOW
SPLIT FLOW
C
O
M
B
O
T
H
ER
AP YJ ET
S
EC
STASEAT
Position 1 - The full
flow is directed to one
series of jets.
Position 2 - The flow
is shared between two
or more series of jets.
Position 3 - The full
flow is directed to a
second series of jets.
MAX MAX MIN MIN
AIR
WATER
MAX MAX
FULL Medium Gentle