Panasonic OMNIVISION PV-DM2799 - Manual (Page 11)

■ Unit ^ Decoder
with
Dolby Digital
( ac 3)
Amplifier Speaker
or
dtS (digital theater systems)
When DVDs recorded in Dolby Digital or dts are played, Dolby Digital bitstream or dts bitstream is output
from the unit OPTICAL digital audio output connector or COAXIAL digital audio output connector. When the
unit is connected to a Dolby Digital decoder or dts decoder, you can enjoy theater-quality audio in your
home. [An optical digital audio cable or coaxial audio cable (both optional) is required when an optional
Dolby Digital decoder or dts decoder is used.]
Notes on connecting
an optical digital audio
cable (optional)
• Remove dust protection cap from
optical digital audio output. Firmly
connect the cable to the connector.
• Always reattach the dust protection
cap when connector is not in use.
unit
Optical Coaxial
□ Q
Dust protection
cap
Optical digital audio
cable (optional)
To optical digital audio
input connector
or
Coaxial audio cable
(optional)
To coaxial digital audio
input connector
Caution for
optical/coaxial digital
audio output connector:
• When connecting an
amplifier (with an optical/
coaxial digital input
connector) which does not
contain the Dolby Digital
(AC-3) or dts decoder, be
sure to select “PCM” at
“Dolby Digital” and “OFF”
at “dts” of the DVD initial
setting “DIGITAL AUDIO
OUTPUT” (See page 52).
• Otherwise any attempt to
play DVDs may cause such
a high level of noise that it
may be harmful to your ears
and damage your speakers.
■ When a dts decoder is
connected, please select
“Bitstream” at “dts” of the
DVD initial setting “DIGITAL
AUDIO OUTPUT”. If “OFF” is
selected, there will be no
sound (See page 52).
• Video CDs and CDs can be
played as normal.
Note:
• Some dts decoders which do
not support DVD-dts interface
may not work properly with the unit.
Decoder with Dolby Digital
(AC-3)/dts processing (optional)
Amplifier
Front
speaker
(Left)
Subwoofer
Front speaker
(Right)
Surround speaker
(Right)
Surround speaker
(Left)