Panasonic OMNIVISION PV-DM2799 - Manual (Page 41)

DVD Operation using On-Screen Displays
When DISPLAY is pressed, On-Screen Displays show disc
information (title/chapter/track number, elapsed playing time,
audio/subtitle language, and angle) and unit information
(repeat play, play mode, Karaoke vocal ON/OFF, etc.)-
Display On-Screen
Displays.
Press DISPLAY in play or
stop mode.
• Each time DISPLAY is pressed,
On-Screen Display changes as
shown below (refer to 42 or 43
page.)
Selected disc information
Selected unit information
DISPLAY button does not function Normal Screen
while DVD TITLE MENU is
displayed.
Select the desired item.
1) Press
AT
(or ◄ ►) to
select.
2) Press SET to set.
<Example of DVD>
TITLE: 12
AUDIO:! m AC -3
sur^^ ^..........
0;13;3A
TITLE; 12 DVD
lm\mm 0 : 12:34
AUDIO;! ENG AC -3 2 cti
SUBTITLE:! EMG ON
ANGLE:!
<Example of Video CD>
immm
videocd
AUDIO: Lfi 0 : 12:34
PlAyBACKCONTBOl:OFF
mmr 0 : 12:34
PlAYBACN CCHTB(X:OFF
Select the desired
setting.
1) Press
AT
to select.
2) Press SET to set.
• For some functions the setting will
be registered immediately without
pressing SET.
• When numbers are displayed (e.g.
title, number), the NUMBERED
keys are also available.
To make corrections,
repeatedly press
AT
and SET to
move to error, then correct.
• Pressing -4 is effective for elasping
time instead of the above buttons.
Press -4 repeatedly to delete the
error, then correct.
To return to the normal
screen,
press RETURN or DISPLAY
repeatedly.
I^CCheck list before you begin.
□ It is necessary, press DVD^TV to
enter DVD mode.
1 DISPLAY
NUMBERED
keys
RETURN
O SELECT
^ AT4^
3
2 SET
3
When DISPLAY button is pressed during playback of a Video CD with
Playback control, the NUMBERED keys are not available on the
displayed screen. In this case, press DISPLAY again to remove the
displayed screen.
When ® appears on the screen while a
button is being operated, it means that
the corresponding operation is prohibited
by the unit or the disc.
41