Panasonic OMNIVISION PV-DM2799 - Manual (Page 12)

One Time Setup
When the unit is turned on the first time, setup
mode is entered automatically.
Press POWER on
the remote or unit.
2
\ CLOCK
CHANNEL/CLOCK AUTO SET
CONNECT ANTENNA CABLE AND
IF YOU USE A CABLE BOX ,
TUNE IT TO voun LOCAL PBS CH
THEN...
PLEASE PUSH CH UP KEY
Start Channel Auto
Set and Clock Auto
Set.
Press CH A
CH AUTO SET PROCEEDING
02
AUTO CLOCK SET
PROCEEDING
V
Case 1 (Setup completed)
Press CH A to
exit.
• If the displayed
time and DST
are not correct,
please do "To
Set or Reset the
Clock” steps on
the next page
and select
“MANUAL.”
V
Case 2j (Setup incomplete)
AUTO CLOCK SET IS INCOMPLETE
PUSH ACT i ON TO SET CLOCK
Set the clock
manually.
Press ACTION
and do ‘To Set
or Reset the
Clock” step D on
the next page.
D
IMPORTANT NOTE FOR AUTO CLOCK SET
• Auto clock set is performed the first
time when the unit is turned off each
day. If used, a cable box must be left
on and tuned to the PBS channel at
the time the unit power is turned off if
you want auto clock set to be done.
• If using, a DSS receiver, it must be
turned off for auto clock set.
• If Cable Box or DSS receiver is
connected to the unit via Audio/Video
Jacks, an RF coaxial cable must also
be connected for auto clock set and
channel auto set features.
• If, for any reason, the time is changed
manually, automatic time correction
will not occur.
12
For assistance, call 1-800-211-PANA(7262)