Panasonic TX-56P800H - Manual (Page 18)

29-OCT-2004 13:13 FROM
TO opgrating instr P, 18
Tuning Channels
Automatic Tune
This TV uses automatic tuning to determine whether or not the TV can receive a broadcast signal which is being sent, and
automatically prepares so that the channel selection can respond to both the position $ete^-and direct select modes.
Before Automatic Tune, Channel Select and Regional System must already be set (Refer to pages IS).
1
AUTO TUNE
Press to select the “AUTO TUNE”.
Press to access to the “AUTO TUNE”.
Search Start.
When a station is found.
The best tuning position is automatically memorised.
2
SOUND SYS
STR
o-
After all stations are tuned, the on-screen display will automatically change from “AUTO TUNE”
to “SOUND SYS” Position.
Press to improve the Sound quality, if the Sound is not clear or no
sound is produced on a programme Number Position.
c
4.5MHz ^ 5.5MHz
6.5MHz ^ 6.0MHz
D
Press to store the Sound System.
TV/AV
O
----- -— P tqss
to exit from the Tuning Menu.
■ This returns the set to the normal viewing condition.
Note:
When the sound volume is too small to confirnn, turn it up by using the sound volume button on the remote control.
Under the normal viewing condition press to enter each programme Number.
Confirm the tuning condition.
If necessary, repeat step 2 for each Programme Number.
18