Panasonic KX-P7510 - Manual (Page 15)

Before You Start
Networking capability (for KX-P7510)
• Supports the following operating systems
— Windows® 95*^A/Vindows® 98*^/
Windows NT 4.0*^
— Netware 3.X/Netware 4.X/Netware 5.0
— UNIX —Macintosh
* Supports 100 Base-TX and 10 Base-T
* Supports the following Print Protocols
— Windows IP Peer-to-Peer Printing
— Windows IPX Peer-to-Peer Printing
— Windows DLC Peer-to-Peer Printing
— LPR
—PSERVER
— Netware Printing
{PSERVER/RPRINTER in NDS and/or Bindery Mode)
* Supports the following Network Protocols
— TCP/IP —IPX/SPX —DLC/LLC
— AppleTalk —DHCP —BOOTP
— RARP —SNMP/MIB —HTTP
Microsoft® Windows® 95 operating system (hereafter Windows 95)
Microsoft® Windows® 98 operating system (hereafter Windows 98)
Microsoft® Windows NT® Workstation operating system, and Microsoft® Windows
NT® Server network operating system Version 4.0 (hereafter Windows NT 4.0)
CO
'<
CO
(D
3
(D
XI
c,
(B
3
CD
Local port
• IEEE 1284 compliant
N ote
• An ECP compatible parallel port supports Windows 95/Windows 98. To turn on the
ECP mode, use the computer’s BIOS setup. Refer to the computer’s documentation for
details.
System requirements
You can use the printer in a networked environment and print from a PC compatible
computer running Windows or from a Macintosh computer.
With a Windows computer
The minimum hardware configuration required to use the printer with an IBM PC or
compatible includes:
• An IBM PC or compatible computer with a 486 processor or higher
• Windows 3.1,3.11 Windows 95, Windows 98 or Windows NT® 4.0*^ (Intel only)
• Appropriate interface cables for your network or printer connection
• 8 MB of RAM for Windows 3.1,3.11 (16 MB recommended for some applications) or 16
MB for Windows 95, Windows 98 and Windows NT 4.0
• 20 MB available hard-disk space • CD-ROM Drive
Microsoft® Windows® operating system Version 3.1 or 3.11 (hereafter Windows 3.1,3.11)
Service Pack 3 or later version is required.
15