Panasonic KX-P7510 - Manual (Page 64)

Appendix
Re-using transparencies that have been fed through the printer once (for example, after
jams or if the transparency is ejected without being printed) can reduce the life of the
consumables and paper path components.
When using transparencies, if the print quality is poor, print on the other side.
With any label stock, the labels must completely cover the backing material.
YES NO
Labels cover the entire backing material.
■ Envelopes
The backing materia! is exposed.
It is recommended that you print and purchase high quality envelopes with diagonal
seams, as shown in the diagram below:
High quality envelopes have the following characteristics:
• A thin, sharply creased leading edge
• Paper weight of 75 g/m^ (20 lbs.)
• Flat, free of curls, wrinkles, nicks, etc.
N ote
• Wrinkle may occur in some case, even if high quality envelopes are used.
Margins for the envelope supported on this printer:
• Do not print anything but characters in the printable area.
64