Timer, Wq' mematmers, Play timer and sleep timer – Panasonic SC-CH84M User Manual
Page 37: Record timer and sleep timer, Timer priority, For your reference, To cancel the sleep timer, To confirm the remaining time, To change the time remaining during operation, Timer w
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
timer
W
q
' MeMatmers
by rcmolp control only
The stereo has a sleep timer so that you can fail asleep with the
music on and have the system stop by itself. When the set time
elapses, the stereo goes into the power standby mode. You have up
to 2 hours time available for iistening and you can set the timer in
30 minute increments.
SLEEP
o
The foiiowing example in the figure shows how to set the system to
standby mode after 30 minutes.
SLEEP
White enjoying the desired source;
Press SLEEP to select the de
sired time.
0:30^1:00-^1:30-i-2:00-^OFF------------------
r
(The display changes each time the but
ton is pressed.)
The sleep timer can be used in conjunction with the play timer or
record timer.
Play timer and sleep timer
To go to sleep listening to an FM broadcast, and wake up the next
morning listening to a compact disc,
(3) Program a CD for play timer.
Follow steps 1-6 on pages 33-34.
d) Tune in the desired band and station, and adjust the volume.
See page 11.
@ Set the sleep timer.
The volume of the play timer does not change if the volume of the
sleep timer is changed.
Record timer and sleep timer
To go to sleep iistening to a compact disc, and then to make a timer
recording from a radio broadcast,
® Program the record timer.
Follow steps 1-6 on pages 35-36.
d) Start CD playback,
d) Set the sleep timer.
Be sure to set the sleep timer to off before the timer recording
begins.
Timer priority
The sleep timer always has priority.
Be sure not to overlap timer settings.
For your reference
The play timer cannot be used in combination with the record timer.
Time setting
if ““-55
5 L E E P -■ i
______
1
_____
3
ie.
Check “SLEEP" is displayed.
The system is turned off after the set time has elapsed.
To cancel the sleep timer
Press SLEEP to select “OFF’.
To confirm the remaining time
(only while power is ON)
Press SLEEP.
To change the time remaining during operation:
Press SLEEP to show the remaining time then press SLEEP to select
the desired time.
The sleep timer turns OFF automatically the moment you attempt to
edit-record a CD.
37