Battery installation, For your reference, Correct method of use – Panasonic SC-CH84M User Manual

Page 5: C^ricerning the remote placement of speakers

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

C^ricerning the remote

placement of speakers

Battery installation

Insert the batteries with this unit as shown below.
Use two UM-4 “AAA”, lEC R03 (1,5 V) or equivalent batteries.

• Do not mix old and new batteries, or batteries of different types

(manganese and alkaline, etc.).

• Never subject batteries to excessive heat or flame; do not attempt

to disassemble them; and be sure they are not short-circuited.

• If the remote control is not to be used for a long period of time,

remove the batteries and store them in a cool, dark place.

• Do not attempt to recharge alkaline or manganese batteries.
• Do not use rechargeable type batteries.

Right speaker

Set the speakers so that the tweeter with the silver cap is on
the outside.
(For United Kingdom)
Speakers are symmetrically the same on the inside, so you
don’t have to orient them in a certain one or another.

For your reference
For your listening pleasure, keep your speakers from touching the
stereo.

Battery life

The battery life is about one year.

The batteries should be replaced if commands from the remote
control transmitter do not operate the unit even when the transmitter

is held close to the front panel.

Caution
Use this speaker only with the recommended
system. Failure to do so may lead to damage to
the amplifier and/or the speaker, and may result
In the risk of fire. Consult a qualified service
person if damage has occurred or if you
experience a sudden change In performance.

Correct method of use

Remote control
sensor

Transmission
window

Operations notes

* •

About 7 meters in front of
the signal sensor (The
actual range will depend
on the angle at which the

remote control is used.)

•Aim the remote control’s transmission window toward the unit’s

sensor. Avoid any obstacles.

• Be sure the transmission window and the unit's sensor are free

from dust. Excessive dust might affect its performance.

•The operation may not be correct if direct sunlight or other strong

light source strikes the receiving sensor of this unit. If there is a
problem, place the unit away from the light source.

• If this system is installed in a rack with glass doors, the glass doors’

thickness or color might make it necessary to use the remote
control a shorter distance from the system.

• Never place heavy items.
• Do not disassemble or reconstruct.
• Do not spill water or other liquids.

Advertising