Panasonic CT-27SF34 - Manual (Page 12)

Optional Equipment Connection and Operation
To Audio AMP Connection (Stereo)
TERMINALS ON BACK OF TELEVISION
• To Audio AMP
Connect to an external audio amp auxiliary input
for monitoring sound through a stereo system.
NOTE: ‘TO AUDIO AMP” terminals cannot be used
directly with external speakers.
Adjustment - When an audio amp is connected to
‘TO AUDIO AMP” terminals:
1. Select SPEAKER “ON” Mode. (Refer to the
Audio Menu Speaker section.)
Set volume of audio amp to near minimum.
Adjust volume of TV to desired listening level.
Adjust volume of audio amp to match the volume
of the TV.
Select SPEAKER “OFF&VAO” (Variable Audio
Output) Mode. (Referto the Audio Menu Speaker
section.)
Audio bass, treble, balance, volume, and mute
can now be controlled by the TV Remote Control.
When “OFF&FAO” (Fix Audio Output) mode is
selected in the Audio Menu, the external
amplifier speakers are controlled by the Audio
Amplifier.
m
ni-in
Prog (Program) Out Connection
Operation
1. Connect optional video equipment as shown.
2. Program Output terminal signal is same as that being viewed on
screen.
3. Monitor or Record as instructed in Optional Equipment Manual.
TERMINALS ON BACK OF TELEVISION
To Video Input
To Left Audio Input
To Right Audio Inputs ^
Monitor or VCR
IM
rd 1
mmm u
WWW
1
- 1 2 -