Panasonic CT-27SF34 - Manual (Page 26)

Timer Feature
Special Feature:
Automatic turn “OFF” after 90 minutes.
The TV has a special feature that will shut itself
OFF after 90 minutes when turned ON by the
program timer unless a function key is pressed
during the 90 minutes.
This feature is used to insure that the TV will not
remain ON unattended for an extended period of
time.
Programming the OFF timer will also cancel the
automatic OFF feature.
(Program) Timer
- The (Dual Program) Timer
feature is capable of turning the TV ON to a desired
channel and then turning the television OFF at a
predetermined time.
NOTE; The clock and day must be set for this feature to
operate. (Refer to Set Up Menu to Set Time &
. Day.)
1. Press .
2. Press ^ or Wand<€ or ^ to highlight the Timer
Icon.
3. Press to display the Timer Control Menu.
KlVfCrt
(T)
4. Press ^ or^ to highlight the TIMER 1 setting.
• Day or days to activate the Timer
• ON (time) - hours and minutes
• OFF (time) - hours and minutes
• CH - the channel the TV is tuned to when the ON Timer
activates.
• SET - NO (Timer feature will not activate)
- YES (Timer feature will activate)
Highlight the Timer 1 or Timer 2 Day/Days option.
Press or ^ to set the day or days for the TV to turn
ON.
The options for setting day are: (MON~FRI),
(SAT-SUN), (DAILY), (SUN), (MON), (TUE), (WED),
(THR), (FRI), (SAT), (EVR SUN), (EVR MON), (EVR
TUE), (EVR WED), (EVR THR), (EVR FRI), (EVR
SAT).
5.
6
.
7. Press W to highlight the ON (Hours/Minutes).
8. Press or ^ to set the time for the TV to turn ON.
9. Press ^ to highlight the OFF (Hours/Minutes).
10. Press or ^ to set the time for the TV to turn OFF.
11. Press ^ to highlight CH number position.
12. Press ^ or ^ to select a channel (from Program
Channel Memory) for the TV to be tuned to when it
turns ON.
13. Press highlight SET position (NO).
tlMCH
©
TIMER2
»©US:
14. Press ^ to activate or ^ to deactivate Timer 1.
•YES=Feature is activated
•NO=Feature is not activated
15. Press ^ to set Timer 2 (if desired). Follow Steps 6
through 14.
16. Presses twice to exit menus.
NOTE: Pressing M
Timer Icon.
Helpful Hintsj
again will return you back to the
• The Program Timer overrides the Sleep Timer.
• Program Timer can only access channels in
Program Channel Memory.
• "Set Time Firsf will appear on screen when trying
to set Timer Day Option without the clock being set.
• If the Program Timer "ON” functions white the set is
operating the set will automatically tune to the
channel designated in the Program Timer.________
Lockout Features
Lockout Mode — This feature allows locking out
the following from viewing:
• Game - Lockout Channel 3 & 4 plus Video Inputs.
• Channel - Lockout up to 4 Channels.
• All - Lockout All Channels plus Video Inputs.
NOTE: This feature will Lockout your selection for up to 48
hours. Be sure to understand this feature before
using. Use a code that you will easily remember,
1. Press (^3 .
- 2 6 -