Incoming cable from home antenna, Incoming cable from cable company, Picture tube (turn television off) – Panasonic CT-27SF34 User Manual

Page 7: Plastic cabinet, Wood cabinet, Remote control transmitter, Care and cleaning

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Installation (com.)

Antenna/Cable Connections

Antenna Connection - For proper reception of VHF/UHF channels, an external
antenna is required. For best reception, an outdoor antenna is recommended. In the

SETUP menu, set the MODE to TV. (Refer to Antenna Mode section.)

Incoming Cable from Home Antenna

Indoor

Typical VHF/UHF Antenna

75 Ohm

VHF/UHF

on Back of Set

300 Ohm

VHF/UHF

on Back of Set

or

300 to 75 ohm Matching
Transformer (Not Included)

Cable Connection - For reception of cable channels, connect the cable supplied by your local cable company. In the
SETUP menu, set the MODE to CABLE. (Refer to Antenna Mode section.)

Incoming Cable from Cable Company

75 Ohm

VHF/UHF

on Back of Set

NOTE: Certain cable systems offset some channels to reduce interference, or have premium (scrambled) channels. A

cable converter box is required for proper reception. Check with your local Cable company for compatibility

requirements.

Other Video Equipment

VCRs, Video Disc Players, Computers, TV games, and DSS equipment can also be connected to the antenna input

connection.

Care and Cleaning

Picture Tube (Turn television off)

Use a mild soap solution or window cleaner and a clean cloth. DO NOT USE ABRASIVE CLEANERS. Avoid excessive

moisture and wipe dry.

Plastic Cabinet

Wipe the cabinet with a soft cloth dampened with water or a mild detergent solution and wipe dry with a soft clean cloth.

Avoid excessive moisture. Do not use benzene, thinners or other petroleum based cleaners.

Wood Cabinet

When dusting or polishing the cabinet, use a clean soft cloth and stroke straight with the grain. An occasional coat of
furniture polish will help preserve the finish. Do not use benzene, thinners or other petroleum based cleaners. Do not

place objects made of plastic or rubber directly on top of the cabinet. A chemical reaction could result causing permanent

marring of the finish.

Remote Control Transmitter

Use a soft cloth slightly moistened with a mild detergent and then wipe dry with a soft clean cloth. Avoid excessive
moisture. Do not use benzene, thinners or other petroleum based cleaners.

- 7 -

Advertising