Panasonic SC-AK57 - Manual (Page 21)

Listening fo topes
□
‘ T O O C
I n i i .
DOLBY HR i r a p p
Z о
□□NR
(S’
RBVMODI
—I I T n о c
; dé >
00 МЯ
Types of tapes which can be played correctly:
The unit automatically identifies the type of tape.
NORMAL POSITIONn'YPE 1 О
HIGH РОЗтОМЛТРЕ II 0
METAL POSITIONЛ'YPE IV 0
You can use either deck 1 or deck 2 for tape playback.
Press [TAPE DECK1/2].
The power will come on automatically,
If the unit was off and a cassette was loaded, play will start au­
tomatically (One touch play function).
^ Press [A DECK1 OPEN] or [ a DECK2 OPEN]
and insert the tape.
Insert the tape with the exposed tape facing down.
Close the holder by hand.
Q Press [DOLBY NR],
You have to turn DOLBY NR ON/OFF according to the type of
recording you made.
Every time you press the button: □□ NR-»(OFF)
Press [REV MODE] to select the reverse mode.
Every time you press the button;
X: One side is played, then playback stops automatically.
Both sides (front side^ reverse side) are played one
time each, then playback stops automatically.
c : ^ y . Both sides are played 8 times each, then playback
stops automatically.
Press [ < \ or [ > / ^ I] to start playback.
i]; The forward side (front side) will play.
[◄]: The reverse side will play.
Q Turn [VOLUME] to adjust the volume level.
VOLUME
DOWN iP
ШМП
;
.......
® Tape direction
-dB OdB
To stop tape playback
Press [■].
To change the deck to be used SI
Press [TAPE DECK1/2] to select the deck you want to use when
you load cassettes into both decks.
To listen to 2 tapes consecutively
Load a tape into each deck and select c :^ d . Both tapes will be
played 8 times each.
m
Playback is interrupted while playing back tapes if you open the
other deck.
T Q О О
/ n i L-
© Deck in use
Reference;
After you have turned a surround system on when listening to an­
other source, the surround system is automatically turned off when
TAPE is selected as the source and the unit switches to two chan­
nel stereo mode.