Panasonic SC-AK57 - Manual (Page 25)

® B B B IBis^ tE^
Retording Jrom compact discs
Preparation;
1. Insert the tape to be recorded onto into deck 2,
Tape direction is automaticaliy set to
Change the tape direction if you want to start recording from the
reverse side. (■* page 44)
2. Insert the CD.
0 Press [DISC 1]-[DISC 5] to select the disc.
0 Press [B] to stop the CD.
Press [DOLBY NR].
You have to turn Dolby NR ON/OFF according to the type of
recording you want to make.
Every time you press the button: □□ NR->(OFF)
t__________ i
Press [REV MODE] to select the reverse mode.
Every time you press the button:
t_____________I
One side is recorded, then recording stops auto­
matically.
Both sides (front side-^reverse side) are record­
ed, then recording stops automatically.
Press [• REC/STOP] to start recording.
• If you selected in step £|, the direction will automatical­
ly change to when recording starts,
•The recording wiil proceed from the first track on the selected
CD and will continue on through the last track of the final
disc.
•The tape deck stops automatically when the CD is finished.
To stop recording
•To add a 4 second silent interval before stopping
Press [■]. The CD will stop automaticaliy too.
•To stop recording without a silent interval
Press [• REC/STOP]. The CD will stop automatically too.
To record programmed tracks
1. After step Q, program the track you want (performs steps
on page 36).
2. Press [• REC/STOP] to start recording.
REV MODE
%
l E
r i r
l O
® Tape direction