Turning the power on, Connect the power cable, Turn on the power to the clavinova – Yamaha CLP-970AM User Manual
Page 17: Power indicator
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Before Using the Clavinova
Turning the power on
1. Connect the power cable.
First insert the plug of the power cable into the AC connector on the Clavinova, then plug the other end of
the cable into the proper AC outlet on the wall.
In some areas a plug adaptor may be provided to match the pin configuration of the AC wall outlets in
your area.
(The shape of plug differs
depending on locale.)
WARNING!
Make sure your CLP-970A is rated for the AC voltage supplied in the area in which it is to be used (voltage rating appears on
the name plate on the bottom panel). In some areas, a voltage selector may be provided on the bottom panel of the main key
board unit near the power cord. Make sure that the voltage selector is set for the voltage in your area. Connecting the unit to the
wrong AC supply can cause serious damage to the internal circuitry and may even pose a shock hazard!
Use only the AC power cord supplied with the CLP-970A. If the supplied cord is lost or damaged and needs to be replaced, con
tact your Yamaha dealer. The use of an inappropriate replacement can pose a fire and shock hazard!
The type of AC power cord provided with the CLP-970A may be different depending on the country in which it is purchased. (In
some areas a plug adaptor may be provided to match the pin configuration of the AC wall outlets in your area.) Do NOT modify
the plug provided with the CLP-970A. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician.
2. Turn on the power to the Clavinova.
Press the [POWER] switch located on the right of the keyboard to turn the power on.
• The screen located in the center of the front panel and the power indica
tor located below the left end of the keyboard lights up.
Power indicator
[POWER] switch
Power indicator
TTT
If you close the key cover
without turning the power
off, the power indicator
remains lit, indicating that
the power is still on.
TTT
A
B
- +
NO YES
■
C
D
When you turn on the power to the Clavinova, a voice name
appears on the screen.
Press the [POWER] switch again to turn off the power to the Clavinova.
• The screen and the power indicator turn off.
CLP-970A
17