Select a voice, Enter record mode and select a recording track, Start and stop recording – Yamaha CLP-970AM User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2.
Select a voice.
Select a voice (or voices) for recording (see page 28).
Set the other parameters, such as reverb and chorus.
Adjust the [MASTER VOLUME] slider to set the volume level to suit
your preference. You can also use the slider to adjust the level during
playback.
After you set the tempo or if the record standby screen does not
appear, press one of the SONG SELECT ^^ ]
] buttons once to
return to the New Song screen.
3.
4.
Enter record mode and select a recording track.
Press and hold down the [REC] button and press the
[TRACK 1] button.
The [TRACK 1] indicator flashes in red. (To cancel recording, press
the [REC] or [STOP] button.)
Record standby screen
Set the tempo, if necessary.
If this record standby screen does not appear, press one of the SONG
SELECT ^^ ]
] buttons once.
Start and stop recording.
Recording begins automatically as soon as you play a
note on the keyboard.
(Optional) Press the [START/PAUSE] button to start recording.
The recording screen displays the current measure number.
Record screen
Measure number in recording
To stop recording, press the [STOP] button. The Clavinova
locates the top of the song.
The [TRACK 1] indicator lights up in green. (Record mode is auto
matically cancelled.)
NOTE
Set the tempo in Step 3.
NOTE
See page 47 for more infor
mation on recording in Dual/
Split mode.
You can record data while
using the metronome. The
metronome is not recorded.
When you press the
[START/PAUSE] button dur
ing recording, recording is
paused. To resume record
ing, press the [START/
PAUSE] button again or play
a note on the keyboard.
When you press the [REC]
button, recording pauses.
40
CLP-970A
TIP
TIP
TIP