Yamaha OWNER'S MANUAL HTR-6130 - Manual (Page 17)

Connections
Information on jacks and cable plugs
Audio jacks and cable plugs Video jacks and cable plugs
■ Audio jacks
This unit has three types of audio jacks. Connection
depends on the availability of audio jacks on your other
components.
AUDIO jacks
For conventional analog audio signals transmitted via left
and right analog audio cables. Connect red plugs to the
right jacks and white plugs to the left jacks.
DIGITAL AUDIO COAXIAL jacks
For digital audio signals transmitted via coaxial digital
audio cables.
DIGITAL AUDIO OPTICAL jacks
For digital audio signals transmitted via optical digital
audio cables.
Notes
You can use the digital jacks to input PCM, Dolby Digital and
DTS bit.streams. All digital input jacks are compatible with
digital signals with up to 96 kHz of sampling frequency.
This unit handles digital and analog signals independently. Thus
audio signals input at the digital jacks are not output at the
analog AUDIO OUT (REC) jacks.
COMPONENT VIDEO
Y PB PR
(Green) (Blue) (Red)
t t i
P b P b
Composite
video cabie
plug
Component
video cabie
piugs
■ Video jacks
This unit has two types of video jacks. Connection
depends on the availability of input jacks on your video
monitor.
VIDEO jacks
For conventional composite video signals transmitted via
composite video cables.
COMPONENT VIDEO jacks
For component signals, separated into the luminance (Y)
and chrominance (P b , P r ) video signals transmitted on
separate wires of component video cables.
Video signal flow for MONITOR OUT
COMPONENT
VIDEO
VIDEO
Output
Input (MONITOR OUT)
PR© PR©
P b © — -------------- ► P b ©
Y © Y ©
13 £n