Yamaha OWNER'S MANUAL HTR-6130 - Manual (Page 26)

Basic setup
The “BASIC SETUP” feature is a useful way to set up your system quickly and with minimal effort.
Notes
• Make sure you disconnect your headphones from this unit.
• If you wish to configure this unit manually using more precise adjustments, use the detailed parameters in "SOUND MENU”
(see page 45).
• Altering any parameters in "BASIC SETUP” resets all parameters manually adjusted in "SOUND MENU” (see page 45).
• Initial settings are indicated in bold under each parameter.
• Press ©RETURN on the remote control to return to the previous menu level.
1
Press 0AMP on the remote control.
2
Press ©MENU.
“BASIC SETUP” appears in the front panel display.
5
Press ©V to select “SUBWOOFER” and then
©<l / o to select the desired setting.
3
Press ©ENTER to enter “BASIC SETUP”.
“ROOM” appears in the front panel display.
Choices: YES, NONE
• Select “YES” if you have a subwoofer in your
system.
• Select “NONE” if you do not have a subwoofer in
your system.
6 Press
© V
to select “SPEAKERS” and then
©<l / o to select the number of speakers
connected to this unit.
Press ©<l / [> to select the desired setting.
Select the size of the room where you have installed
your speakers. In general, the room sizes are defined
as follows:
Choices: S, M, L
[U.S.A. and Canada models]
S (small) 16
X
1.3 ft, 200 ft2 (4.8 x 4.0 m, 20 m2)
M (medium) 20 x 16 ft, ,300 ft2 (6.3 x .5.0 m, 30 m2)
L (large) 26
X
19 ft, 450 ft2 (7.9 x 5.8 m, 45 m2)
[Other models]
S (small) 3.6
X
2.8 m, 10 m2
4.8
X
4.0 m, 20 m2
6.3
X
5.0 m, 30 m2
M (medium)
L (large)
Choice Display Speakers
2spk B [HI Front L/R
3spk
[y [c;
Front L/R, Center
4spk
IL!
1
j
iOi
Ü
Front L/R, Surround L/R
5spk
IL C
W
R
M
Front L/R, Center, Surround L/R
22
En