Yamaha OWNER'S MANUAL HTR-6130 - Manual (Page 48)

1 Set menu 1
Option menu
Use this menu to manually adjust the optional system parameters.
Parameter Features Page
fTN:)I;INu.j::iV SET Adjusts the brightness of the front panel display. 50
Locks sound field program parameters and other set menu settings. 50
C)HUDIU SELECT Designates the default audio input jack select setting mode for the input sources connected
to the DIGITAL INPUT jacks when you turn on the power of this unit.
50
DIN uh F h M:: ini Sets all the parameters of the sound field programs to the initial factory settings. 50
EINSLUETUUTH Pairs the connected Yamaha Bluetooth adapter (such as YBA-10, sold separately) with a
Bluetooth component (see page 41). 50
■ Signal information :
Use this feature to check audio signal information (see page 32).
Using set menu
Use the remote control to access and adjust each
parameter.
You can change the set menu parameters while this unit is
reproducing sound.
1 Press ® AMP and then press ©MENU on
the remote control.
“BASIC SETUP” appears in the front panel display.
. BPSIC SETUF"
4 Press ©
A / V
repeatedly and then press
©ENTER to select and enter the desired
menu.
The following menus appear in the front panel
display as you press
© A / V
repeatedly.
1 SOUND IIENi.
t
2 INF'UT IIENi.
t
3 UF'TIUN MENU
2
Press © A / V to select “MANUAL SETUP”
== MPHU
h
L SETUF"
3
Press ©ENTER to enter “MANUAL SETUP”
“1 SOUND MENU” appears in the front panel
display.
1 SOUHC) FIEHLJ
5 Press ©
A / V
repeatedly and then press
©ENTER to select and enter the desired
submenu.
• Repeat this step to navigate to and enter the items
you want to adjust.
• To return to the previous menu level, press
©RETURN.
6 Press
© A / V
to select the desired parameter
and then ©<l / o to change the parameter
value.
• Press ©1> to increase the value.
• Press ©<l to decrease the value.
7
Press ©MENU to exit from set menu.
44
En