When you select the sur. standard program, To cancel, press pure direct again – Yamaha HTR-5860 User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PLAYBACK
When you select the SUR. STANDARD program;
FliO L.OialC
Dolby Pro Logic processing for any sources.
Dolby Pro Logic II processing for movie software.
F''L..I! riusic
Dolby Pro Logic II processing for music software.
F''L..II (ii-iar'ie
Dolby Pro Logic II processing for game software.
F''L..IIx ilovie
Dolby Pro Logic IIx processing for movie software.
F''L..IIx
ilusiG
Dolby Pro Logic IIx processing for music software.
F1....Í Ir;: fi-Hne
Dolby Pro Logic IIx processing for game software.
Mii'O! ?:> L! n0j''!.;!
DTS processing for movie software.
Fieoifc. iltisic
DTS processing for music software.
When you select the SUR. ENHANCED or MOVIE
THEATER program:
FliO L.OiFiiC
Dolby Pro Logic processing for any sources.
F''L..II
Dolby Pro Logic II processing for movie software.
F''L..IIx ilovie
Dolby Pro Logic IIx processing for movie software.
DTS processing for movie software.
You can also select a decoder by pressing < / > on the remote
control ttdien the decoder type is displayed in the short message
display.
Note
The Pro Logic IIx decoder is not available w'hcn "SUR. B L/R
SP" is set to NONE (see pages 64).
■ Listening to high fidelity stereo sound
(PURE DIRECT)
PURE DIRECT allows you to bypass this unit’s decoders
and DSP processors, and turn off the video circuitry and
front panel display to enjoy pure high fidelity sound from
analog and PCM sources.
Press PURE DIRECT {or press AMP to select the
AMP mode, then press PURE DIRECT on the
remote control) to activate pure direct.
The indicator around the front panel button lights up.
PURE DIRECT
i .AMP .J
PUREOmECT
Front panel
Remote control
The front panel display switches on inomeiharily when an
operation is performed.
To cancel, press PURE DIRECT again.
The indicator around the front pane! button goes out and
the previous settings are restored.
Notes
• To avoid unexpected noise, do not. play [)TS-encodcd CDs in
this mode.
• When a rnulti-chaiinel signal (Dolby Digital or DTS) is input,
this unit automatically switches to the corresponding analog
input.
• No sound w'ill be output from the subw'oofer.
• The followung operations are not possible during PURE
DIRECT operation:
-switching the sound field program
-displaying the OSD
- adjusting SET MENU parameters
- all video functions (video conversion etc.)
• PURE DIRECT is automatically cancelled wdienevcr this unit is
sel to the standby mode.
34