Panasonic NV-HD100EA - Manual (Page 15)

Playback
Other Playback Functions
To change the playback speed
Using Shuttle Ring:
1 Press PAUSE/STILL.
1 Press SEARCH.
2 Press + or - repeatedly.
+; To increase the playback speed forward.
-: To increase the playback speed backward.
SEARCH
Q—O—^3
To locate the desired picture exactly
1 Press PAUSE/STILL.
2 Turn Jog Dial.
To obtain high speed picture during fast
forward or rewind
Keep FF pressed during fast forward.
Keep REW pressed during rewind.
©/FF REW/©
•The same operation can also be performed by turning the
Shuttle Ring,
To skip scene
Press SKIP during playback.
SKIP
o
•The following 30 seconds will be skipped.
• Each press gives a 30 seconds time span up to 4 minutqp.
To return to a specified scene
1 Press RESET to set the counter to 0:00.00.
2 After playback, press ZERO STOP in the stop mode.
RESET
O
ZERO STOP
O
•The tape will be rewound or fast forwarded to 0:00.00.
To playback a recorded part repeatedly
Press REPEAT in the stop mode or during playback.
REPEAT
O
Beginning
of Tape
mux
End of
Recorded Part
I
Repeat Playback '------- y-------'
PLAY Control Signal Interruption
(at least 5 sec.)
CZJ
REW
To find the beginning of each recording
For example:
Searching for the 2nd recorded segment in the forward
direction.
Press INDEX ►W twice.
INDEX
0—0
•After finding the specific recorded segment, playback
starts automatically.
•For the reverse direction, press INDEX m .
• Up to 20 index signals can be searched for in both
directions.
Recording Index Signals
Index signals are recorded in following cases.
WRITE indicator appears on the Display.
•When a recording is started by pressing REC.
•When REC is pressed during recording.
•When timer recording is activated.
Note:
•Audio reproduction of linear (conventionally recorded)
tapes will be monaural when played back on the FM Hi-Fi
video recorders.
•Cue, review or slow playback wilt be automatically
released after 10 minutes, and still playback after
5 minutes.
•The Index search function can only work correctly, if the
index signals are spaced at least 3 minutes apart in the
SP mode and 5 minutes apart in the LP mode.
c
c
0
I