Panasonic NV-HD100EA - Manual (Page 25)

Other Functions
Editing
Other Functions
Automatic VTR oft time setting
Press SLEEP for the desired time.
SLEEP
□
• Each press gives a 30 minutes time span up to 9 hours.
•To cancel the setting time, press SLEEP repeatedly to set
0 : 00 .
NTSC Playback
Tapes recorded in the NTSC system can be played back
with this VTR via a PAL system TV set.
A note about NTSC playback on PAL TV function
On some TVs, the playback picture may roll up or down:
adjust this using the V-HOLD control on the TV. TVs not
equipped with a V-HOLD control cannot correct this
condition. The playback picture will shrink vertically, and
black bars will appear both on the top and bottom of the
screen. This is not an indication of a malfunction.
•During Cue, Review, Still or Slow playback, the picture
may not be in colour.
•Recording in the NTSC system is not possible with this
VTR.
•This function is designed only to allow the playback of
tapes recorded by NTSC signals on a PAL system TV,
The NTSC signal is not completely converted to a PAL
signal. For this reason, images played back by this
function cannot be recorded on another VTR.
•When playing back a tape recorded in the NTSC system
SLP mode, the "LP" indication will light up in the Displa^^.
Other Automatic Functions
Automatic playback
When a cassette without an erasure prevention tab is
inserted, the VTR starts playback automatically.
VTR-off playback
When the VTR is off, an inserted cassette can be played
back by pressing PLAY.
Automatic rewinding
When the tape reaches its end during recording (except for
timer recording) or playback, it will automatically be
rewound to the beginning.
Automatic switching off and ejection
When the VTR is switched off, an inserted cassette can be
ejected simply by pressing EJECT. The VTR will eject the
cassette and automatically turn itself off again.
c
C
,c
•C
a
V.
a
c
C
T
c
c
c
CT
V
0
1
2S