Precautions, Avoid sudden changes in temperature, Humidity and dust – Panasonic NV-HD100EA User Manual

Page 34: Do not obstruct the ventilation holes, Keep away from high temperature, Keep magnets away, No fingers or other objects inside, Keep water away, Lightning, Cleaning the vtr

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Precautions

Please read these cautions before you operate this VTR.

Avoid Sudden Changes in Temperature

If the VTR is suddenly moved from a cold place to a warm
place, moisture may form on the tape and inside the VTR.

In this case, the Dew Indicator “o ” will flash on and off and

the VTR will not operate.

Humidity and Dust

Avoid places where there is high humidity or much dust,
which may cause damage to internal parts.

Do Not Obstruct the Ventilation Holes

The ventilation holes prevent abnormal increase in
temperature. Do not block or cover these holes. Especially

avoid covering the holes with soft materials such as cloth or
paper.

Keep away from High Temperature

Keep the VTR away from extreme direct heat such as
direct sunlight, heating radiators, or closed automobiles.

Keep Magnets away

Never bring a magnet or magnetized object near the VTR
because it will adversely affect the performance of the VTR.

No Fingers or Other Objects Inside

Touching internal parts of this VTR is dangerous, and may

cause serious damage to the VTR. Do not attempt to
disassemble the VTR. There are no user serviceable parts
inside.

Keep Water away

Keep the VTR away from flower vases, tubs, sinks, etc.
CAUTION: If liquids are spilled into the VTR, serious
damage could occur. If you spill any liquid into the VTR,
consult qualified service personnel.

Lightning

To avoid damage by lightning, disconnect the aerial plug
from the VTR.

Cleaning the VTR

Wipe the VTR with a clean, dry cloth. Never use cleaning
fluid, or other chemicals. And do not use compressed air to
remove dust.

Stacking

Place the VTR in a horizontal position, and do not place
anything heavy on it.

Video Head Clogging

The video heads place picture signals on the tape during
recording and read picture signals from the tape during

playback and they are, therefore, of critical importance for

the picture quality. If the VTR is used over extremely fong

periods of time, these heads may still become dirty and
clogged. In such a case, the signals can no longer be

recorded correctly, and the playback picture will be
distorted accordingly. This is the case, for example, during

the playback of a tape, the sound is reproduced normally,

but no picture is seen, or the picture is greatly distorted.
When such a symptom case occurs, have the recorder

checked by qualified service personnel.

If Dew Condensation Forms in the VTR

* •

Condensation may form in the VTR if:

•The VTR is in a room when the heater has just been

turned on,

•The VTR is in a room with steam or high humidity. '
•The VTR is brought from cold surroundings into a

well-heated room.

•The VTR is suddenly brought from cool surroundings,

such as an air-conditioned room or car, to a place which is
hot and humid.

When dew forms in the VTR:
The Dew Indicator “d ” on the Multi-Function Display will
flash on and off and all the function buttons are made

non-operational to protect the tape and the video heads.
When the Dew Indicator flashes, wait until this indicator

disappears.
• If dew condensation forms inside the VTR while the

OPERATE Switch is off, it will turn on automatically and
the Dew Indicator will flash on and off. As soon as the dew

condensation has been dissolved, the VTR will turn itself
off again.

J4

Advertising