Panasonic DVD-RV41 - Manual (Page 26)

DVD-RV41
Refer also to “Common procedures” (=* page 21) and the Audio menu
in “Summary of initial settings” page 22).
ii iKiKStfe.!;-,. ■hi.-, isini,'.istói-*
m±m
Refer also to “Common procedures” page 21) and the Disc menu
in “Summary ot initial settings” (>* page 22).
PCM Down Conversion
No (Factory preset);
When you have connected an amplifier with audio cables.
Yes:
When you have connected an amplifier with an optical digital audio
cable.
Copyright protection limits digital output to 48 kHz/16 bit.
When playing DVDs recorded in 96 kHz
Sound is output as follows in accordance with the connections and
settings you have made.
Setting
Connection
Digital Analog
No
No output (If there is no
copyright protection, audio is
output at 96 kHz. ’ ') Output as
96 kHz
Yes
Converted and output as 48
kHz/16 bit
Converted and
output as 48 kHz
' The connected equipment must be able to handle 96-kHz LPCM in
order to take advantage of high quality audio found on these discs.
Dolby Digital
Bitstream (Factory preset):
When you have connected a unit with a built-in Dolby Digital decoder.
PCM:
When you have connected a unit that doesn’t have a built-in Dolby
Digital decoder. -^
DTS Digital Surround
Oft (Factory preset):
When you have connected a unit that doesn't have a built-in DTS
decoder. (No digital signal is output.)
Bitstream;
When you have connected a unit with a built-in DTS decoder.
MPEG
DVD-RV41
(For the United Kingdom, Continental Europe,
Australia and N.Z.)
PCM (Factory preset):
When you have connected a unit that doesn’t have a built-in MPEG
decoder.-^
Bitstream:
When you have connected a unit with a built-in MPEG decoder.
^These changes to digital audio output must be made, other­
wise bitstream signals the decoder cannot handle will be out­
put. If these signals are output, “noise” will be output which
can cause harm to your ears and speakers.
When setting ratings (When the level is 8)
The password screen is shown when you select levels 0 to 7.
1. Input a 4-digit password with the numbered buttons and press
[ENTER].
PiHiaaoiiic
SETUP
SEL£CT
■■A T
<iat>^ ■■■
/ V o-
EKŒR RETURN
Ratings
Enter a 4-dlgit password,
then press ENTER.
Password
• If you enter a wrong number, press [CANCEL] to erase it before
you press [ENTER],
The lock symbol appears closed to show the rating is locked.
Do not forget your password.
2. Press [ENTER] to confirm the 4 digits.
Now, when you insert a DVD that exceeds the ratings limit you
set, a message appears on the television.
Follow the on-screen instructions.
When changing ratings (When the level is 0 to 7)
The password screen is shown when you select “Ratings”,
1. Input a 4-digit password with the numbered buttons and press
[ENTER],
Panasoi^
SETUP
j \" / " ■■ Ratings ■ ]
[ Unlock Player |
j Change Password |
SELECT
.. A. ■
■ ■ 400 :
■ V. : O-
ENTER RETURN
1 Change Level
1 Temporary Unlock |
2. Select the item with [A.T] and press [ENTER], and follow the on­
screen instructions.
if
Î9
CO
c
o
'■&
2
at
&
Xi
8
c
g
T3
'it