Panasonic DVD-RV41 - Manual (Page 29)

Home Theater-Enjoying more powerful sound
s
*lw
s
is
<b
£
i
ii-n-
*=',;■»
r .*
► • V, 1
hpi t'ri' iri' f{¡initial Al • H k . ■• • .
J.:
D ^
■ -C
11
VI ct
1 Iw."
cirir
^.tii 1
1 ^ #>in ly.a ii
rtiirir ■ 1 vv l.w^^.V '-dl
kiiipiit '
'*1-II rl idl
" ' 9 id 1.1 yU
I I J
rl tC^rll r
DVD-RV41
® BacK of the unit
DVD-RV41
@ Back of the unit
iMSi
A U D O O U T VJnEO SViD ED
nU T H hT
@
O PTIC AL
0 @@
ii
—
1
® Insert fully, with
this side facing
up.
©Select “2-channel” (-»page 22, Audio-Speaker Setting).
■.vj»aATjssa
•Select “No” in “PCM Down Conversion” (»• page 25).
Adjust the settings to suit the equipment you have con­
nected page 25).
To enjoy Dolby Pro Logic
®lf you connect an amplifier with a Doiby Pro Logic decoder, you will aiso need to connect center and surround speakers to enjoy
surround sound. Read the instructions for the equipment for connection detaiis.
•Turn Advanced Surround and Bass Plus off (•• page 14). The Dolby Pro Logic decoder will not function correctly if Advanced Surround
and Bass Plus is on.
You can enjoy more powerful bass by connecting an active subwoofer,
(g) Audio cable
(h) To the subwoofer’s -«-<31>=4y====<:(jj3>
input terminal
• Place the subwoofer as close as possible to the front cent­
er.
•Turn BASS PLUS on to boost the output from the subwoofer
("♦ page 14).
•Adjust the volume on the subwoofer to suit your preference.
B Analog recording
You can record to an MD or cassette tape. Using analog connection
means sound will be unaffected by the copy guards found on DVDs.
To make an analog recording
1. Connect the recording equipment with an audio cable {•* Q
above).
2. Set “Speaker Setting” to "2-channel" page 22). liritaiMij
(If this is set to “Multi-channel", only the audio for the front 2
speakers will be recorded.)
B Digital recording
You can record the digital signal directly onto an MD,
The signals on DVDs will be converted to 48 kHzi^ie bit linear PCM.
Ensure the following conditions are met.
•There is no copy guard recorded on the disc.
•The recording equipment can handle a sampling frequency of
48 kHz/16 bit.
To make a digital recording
1. Connect the recording equipment with an optical digital audio
cable Q above).
2. When recording DVDs, change the digital audio output settings
(«■ page 25).
PCM Down Conversion: Yes
Dolby Digital: PCM
DTS Digital Surround: Off
WPFn-‘ pr:M