Connection to a television – Panasonic DVD-RV41 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connection to a television
I
•o
§
a
Ot
c
t:
C3
DVD-RV41 10VD-RV31
These pages explain how to connect the unit to a television and set it up so you hear the audio through the television's speakers. Connections and
procedures that enable you to enjoy more powerful sounds are described beginning on page 26.
Before connection
•Disconnect the AC mains lead.
•Refer to the television's operating instructions.
FOR UNITED KINGDOM ONLY
READ THE CAUTION FOR THE AC MAINS
LEAD ON PAGE 4 BEFORE CONNECTION.
Connecting to a television with video input terminal (The illustration shows DVD-RV31 for the United Kingdom and Continental Europe.)
See below if your television has a SCART terminal. S video terminal, or component video terminals.
(^Television
AUDIO VIDEO
IN IN
L
Conserving power
This unit consumes a small amount of power,
oven when it is turned off.
F-or ihe Umii'cl Kinqòom aixl ConiiixiiUil Kurope
©{RedXWhite)(Yellow)
(£> Audio/video cable (included)
DTo household
mains socket
t
{Red)(White)(Yellow)
"|J
1
0 AC mains fead —
(included)
0 Back of the unit
r ____ ______ ~
LU
iBiiua
1 ^ ^
I-POODODODOO
i^qoooOBooon
approx. 4 W
For Australto and N.Z.
approx. 3W
approx. 3.5 W
To save power when the unit is not to be used lor
a long time, unplug it from Ihe household mams
socket.
Connect Your Unit Directly
To Your Television.
Do not connect the unit
through your video cassette re
corder when setting up your
home entertainment system,
because the picture may not
be played corroctty due to the
copy guard.
Connecting to a teievision and a video cassette recorder with 21-pin SCART terminai
SCART terminal(s): for the United Kingdom and Continental Europe only
To improve picture quality, you can change the video signal output from the AV (AV1) terminal from 'Video' to either'S-Video*'or 'RGB" to suit the
COMPONENT VIDEO OUT terminals: for Australia. N.Z. and Asia only
Connect the audio terminals as described above.
0 S video cable (not included)
©TV'sS
I
video input
terminal
Video cable (not included)
. 33 J
•• Y terminal
• C [ 3 — « — P a terminal
^
* Ps terminal
TV's component video
input terminals
The S-video terminal achieves a more vivid picture than the VIDEO
OUT terminal by separating the chrominartce (C) and luminance (Y)
signals. (Actual results depend on the television.)
Connection using these temunals outputs the color difference signals
(Ps*''P>>) and luminance signal (Y) separately m order to achieve high
fidelity in reproducing colors.