Installation procedures, B) using the rubber cushion (option), Installation guide – Panasonic CQ-DF201U User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
□ Installation Procedures
First complete the electrical connections, and
then check them for correctness. (=> page 24)
®
Insert mounting collar 0 into the dashboard, and
bend the mounting tabs out with a screwdriver.
Secure the rear of the unit.
After fixing mounting bolt CD and power connector
, fix the rear of the unit to the car body by either
method (a) or (b) shown below.
Insert trim plate (§)•
Make sure that the lock
lever (iii) is flush with the if-
mounting collar © (not !;
projecting outward).
Lock lever
After installation, reconnect the negative
0
battery terminal.
(b) Using the rubber cushion (option)
Rear support bracket
Rubber cushion (option) (provided on the car)
(D Mounting bolt
0 Mounting collar
DRZOitU
21