Place the removable face plate into case, Install removable face plate, Security indicator – Panasonic CQ-DF201U User Manual

Page 23: M&mxs

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

This unit is equipped with a removable face plate. Removing this face plate makes the radio totally inoperable.

The security indicator will blink.

Place the Removable Face

Plate into Case

0 Switch off the power of the unit.

® Remove the removable face plate. (=> page 22)

Ф

Gently press the button of the case and open

the cover. Place the face plate into the case and

take it with you when you leave the car.

Install Removable Face Plate

^ Fit the face plate with its right or left hole on

one of the pins provided on the main unit.

® Fit the other hold on the other pin applying

slight pressure.

© Move the face plate up and down a few times to

make sure it is secure. Then close the front

panel and press down the right side of the face

plate until it clicks into plate.

Security Indicator

The security indicator blinks when the removable

face plate is removed from the unit.

Press and hold

[SEL]

to turn the security indicator

on or off. {“LED ON” or “LED OFF”)

iO

Ш

<=>

iiJ 0RF

Default

Display

Security indicator

1 Ш З Ш

1

Blinks

til

ÊFIF

OFF

Cautions:

® This face plate is not water-proof. Do not expose it to water or excessive moisture.

• Do not remove the face plate white driving your car.
• Do not place the face plate on the dashboard or nearby areas where the temperature rises to high level.

• Do not touch the contacts on the face plate or on the main unit, since this may result in poor electrical

contacts.

© If dirt or other foreign substances get on the contacts, wipe them off with a clean and dry cloth.

• Do not apply a strong downward force onto the face plate and do not put anything on it while it is open, or

it might be damaged,

m&mxs

23

Advertising