Programmable remote controller and digital scanner, How to operate the digital scanner – Panasonic NV-FS1 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PROGRAMMABLE REMOTE CONTROLLER AND
DIGITAL SCANNER
Part Number: VEQ 0915
O
VTR On/Off Button
Q
Audio Select Button
e
Memory/Search Button
O Reset/Index Button
0 Programme Position (Channel) Selector Buttons
press button
select channel
1-9
10
20
11-32
for example 32
[T] — HE] respective channel
1
w
©
e
©
©
©
©
©
©
©
©
If more than 5 seconds pass between the first, second
and third push, the channel will not be changed.
Record Buttons (•)
Both buttons must be depressed together to activate
the Record function.
Pause/Still Button (II)
Rewind ^-^/Review @ Button
Slow Buttons
Intro Scan Button
Double Speed Playback Button (X2)
Fast Forward b^^/Cue @ Button
Play Button (b-)
Still Advance Button (lb)
Stop Button (■)
(i) Transmit Button
Bar Code Reading Section
@ Digital Scanner On/Off Switch
® Bar Code Reader Display
0 Date Display
0 Start Time Display
0 End Time Display
0 Channel Display
0
Check Indicator
(5) Transmitting Section
How to Operate the Digital Scanner
Set the Digital Scanner On/Off Switch to “ON”.
•If no operation is performed for more than 25 seconds, the
scanner will automatically switch over to the power-saving
standby condition and the lamp will go off. (In this case, if
bar codes have already been read but not yet transmitted
to the VTR, the data will be cancelled.)
•When the Digital Scanner On/Off Switch is set to "ON” but
the lamp is not lit, set the switch to “OFF” and then to
“ON” again.