Information codes, Information codes -4 – Panasonic Panafax UF-311 User Manual

Page 60

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Information Codes

When something unusual occurs, the display may show one of the

Information Codes below. These will help you fix the problem.

Info. Code

Meaning

Action

001/002

Recording paper jam.

Remove jammed paper.

(See page 7-6)

010

No recording paper.

To load the paper,

(see page 2-7)

014

Print Cartridge is not attached.

Attach the Print Cartridge,

(see page 2-5)

015

Out of Ink.

Replace the Print Cartridge,

(see page 7-9)

030

Document misfeeding.

1. Reload the document properly, (see

page 4-2.)

2. Remove document jam. (see page 7-7.)
3. Adjust ADF. (see page 7-12.)

03l‘

Document paper is too long or jammed.
Document length exceeds 78.8 inches {2

meters).

1. Reload the document properly, (see

page 4-2)

2. Remove document jam.

(see page 7-7)

060

Cover is opened.

Close the Cover.

061

ADF Door is opened.

Close the ADF Door.

400

During initial handshake, receiving station

did not respond or communication error
occurred.

1. Check with other party.

2. Reload the document and send again.

402

During initial handshake, communication

error occurred.

Reload the document and send again.

403

No polling capability at the remote side.

Ask remote side to set

'"POLLBDsON'".

404/405

During initial handshake, communication

error occurred.

Reload the document and send again.

407

No confirmation from the receiving

station for the previous page sent.

Wait a few minutes and send again.

408/409

Remote side confirmation of previous
page is illegible.

Wait a few minutes and send again.

411

Polling password does not match.

Check polling password,
(see page 5-1)

412

No data from the transmitting side.

Check with the other party.

414

Polling password does not match.

Check polling password,
(see page 5-1)

415

Polling transmission error.

Check polling password,

(see page 5-1)

416/417

418/419

Received data has too many errors.

Check with the other party.

420

Machine goes to receiving mode, but
receives no command from the

transmitting side.

1. Remote side misdiat.

2. Check with the other party.

422/427

Interface is incompatible.

Check with the other party.

430/434

Communication error occurred while
receiving.

Check with the other party.

436/490

Received data has too many errors.

Check with the other party.

492/493

494

Communication error occurred while

receiving.

Check with the other party.

495

Telephone line disconnected.

Check with the other party.

7 - 4

Advertising