Panasonic Panafax UF-311 User Manual
Page 64
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Cleaning the Scanning
if the receiving party reports that the received documents were black,
Plate and Scanning Glass
or contained black lines, try making a copy on your unit. If the copy is
black or has black lines, the Contact Image Sensor unit or the Scanning
Roller is probably dirty or defective and must be cleaned.
To clean the Scanning Plate or the Scanning Glass, follow the
procedure below,
1. Push the Latch Button on the upper left side of the Control Panel
and open the ADF Door.
2.
Wipe the Scar>ning Plate and Scanning Roller gently with a soft
cloth. Be sure to use a clean cloth, the Scanning Glass can be easily
scratched.
Scanning Plate
3. Close the ADF Door.
7 - 8