Storing blood pressure readings, Iljj 8г – Panasonic EW3006 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
storing blood pressure readings
Up to 90 readings each can be stored in the memory.
(NOTE: When repiacing fiat batteries, no data wiii be lost even when the
batteries have been removed.)
Fig. 10-a
ILjJ
8г
Pulse
H D
/min.
^
a
J C
Fig. 10-b
M/R
Fig. 10-c
1. The CEI mark will flash after a measurement has
been completed (Fig. 10-a).
Press the Memory/Recall button.
2. Memory storage is completed.
• Readings of up to 90 measurements can be stored
in memory (Fig. 10-b). Readings over the memory
capacity will be recorded over the oldest
measurement in memory. The data numbers will
also be changed.
• Readings cannot be saved when a measurement
has been unsuccessful (display of the error mark
E
for blood pressure readings). As nothing will be
recorded the data number will not be changed.
* Readings can be saved, however, when the
E
mark is displayed for the pulse rate.
20