Troubleshooting – Panasonic EW3006 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Troubleshooting
Display
Status before error
Check points
Pressurization to above
280 mmHg was
performed.
(Re-pressurization was
performed several
times.)
Check whether
measurements are
being taken correctly
and whether you are
assuming the correct
posture. Make sure
the unit is on the palm
side of the wrist.
(See pages 10-14.)
Pressure decreased
suddenly and E
appeared in the display.
V mark only blinks a
few times, or not at all.
Check whether the
pressure cuff is
attached to your wrist
correctly. Make sure
the unit is on the palm
side of the wrist.
(See page 10.)
Cuff does not inflate.
Your hand or wrist
moved.
Has the unit detected
movement?
(See page 18.)
The E
blinks on
the display
24