Pc input connections (front), Pc input connection (front), Pc input connections (front) helpful hint – Panasonic CT-36VG50 User Manual
Page 39: Helpful hints
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PC Input Connections (Front)
Helpful Hint
An input signal must be connected to
the input terminals of the monitor, in
order to access PC and DTV mode
Icon menus.
Operation
1. Select PC (Front) from the TV/PC/DTV menu (located in the TV/PC/DTV Icon).
NOTE:
To select PC (Rear) press the INPUT button, while PC (Front) is highlighted in the TV/PC/DTV
menu.
2.
Connect a 15-pin Connector cable
(the supplied cable meets FCC standards)
from the computer
15-pin output terminal to the monitor PC INPUT 15-pin terminal, as shown.
3. Connect an Mini-jack cable from the computer Audio output sound source jack to the monitor AUDIO
INPUT jack, as shown.
NOTE:
To operate your Monitor and computer properly, refer to the instructions furnished with the computer.
TERMINALS ON FRONT OF MONITOR
(LOCATED BEHIND FRONT CONTROL DOOR)
To front Audio
Input of monitor
ri *
t,
To 15-pin input
terminal of computer
15-pin Connector Cable (TSXX4515-3)
(Use of the supplied cable is recommended)
From 15-pin output
terminal of computer
TERMINALS ON BACK OF COMPUTER
Helpful Hints:
If the monitor image is scrambled after connecting to a computer,
refer to the troubleshooting section for changing the computer
resolution.
scrambled image
■
-
38
-